बन्धनको वर्गीकरण

हात्ती निर्माण अपरेसन उठाउने मा एक अपरिहार्य धांधली सहायक हो। हत्केला उठाउने pulleys र निश्चित slings जडान गर्न को लागी प्रयोग गर्न सकिन्छ। यो एक प्रकाश र लचिलो जडान उपकरण हो कि व्यापक रूप मा प्रयोग गरीन्छ।बन्धनधनुष हckकles र यू आकार को हckक into मा आफ्नो उपस्थिति विशेषताहरु अनुसार विभाजित गर्न सकिन्छ। उद्देश्य अनुसार, त्यहाँ छन्: चेन हात्तीहरु, एंकर हात्तीहरु, र अस्थायी बंधनहरु।

(१) चेनबाँध is a बाँध used to connect the anchor chain. When in use, the horizontal bolt should be upward, and the horizontal bolt should be round to prevent it from rotating in the bolt hole and increase its strength. When using, first take out the horizontal bolt of the बाँध, put the U-shaped buckle into the anchor chain ring to be connected, and then connect the horizontal bolt in series to an anchor chain ring above. In order to prevent the horizontal bolt from coming out, there is an oblique hole at each of the two ends of the horizontal bolt and the U-shaped buckle for driving the brake oblique pin. In order to prevent the oblique pin from coming out, a green lead seal should be inserted into the cavity left at the pin hole. Before the oblique pin is inserted into the pin hole, calcium-based grease should be applied to prevent rust. 

(२) लंगर बाँध is the बाँध used to connect the anchor chain and the sinker, and the method of use is the same as the chain बाँध.

(3) The floating बाँध is the बाँध used to connect the floating body and the anchor chain, and the method of use is the same as the chain बाँध.